Deacons s14

[Deacon]

Well this is my new ride, its a 1995 240sx SE
Specs.
ka24de
Automatic(going to convert soon)
Nismo Coilovers
Motegi Touge wheels, 17's up front and 18's in rear...
Project.
Sr20det rebuild/build up
http://a312.ac-images.myspacecdn.com/images01/111/l_f04dae8bfd12b5df310d72a2cc298b9f.jpg
http://a301.ac-images.myspacecdn.com/images01/44/l_07e54b29aec68530c4df9fe47c83771c.jpg
http://a186.ac-images.myspacecdn.com/images01/89/l_ae6e71373df10fef4d2d9729c6919901.jpg
http://a772.ac-images.myspacecdn.com/images01/50/l_23faf4f091af5ca0b50f4f7978809df3.jpg
http://a151.ac-images.myspacecdn.com/images01/53/l_43b83d82f9193c22c64d35c9201b7fa6.jpg
http://a360.ac-images.myspacecdn.com/images01/74/l_9f615598d6a04c3019bc5e295b812287.jpg

[Deacon]

Well update on the s14, picked up my new project for it...
Sr20det redtop
http://c3.ac-images.myspacecdn.com/images02/51/l_593e1022ffea4286b19ff1def0513eae.jpg
http://c4.ac-images.myspacecdn.com/images02/38/l_cb89abe80797491ab443974bc92e6de7.jpg
http://c1.ac-images.myspacecdn.com/images02/51/l_2f14921a82d74f70855e574eb45b65d4.jpg
and the bad news... ate a bearing so im gonna do rebuild on the bottom end, not sure if build or rebuild to factory spec...
http://c2.ac-images.myspacecdn.com/images02/31/l_3add8f85862a4f9da1ad5f99f8c6d1e9.jpg
Ill keep you updated on the build process... more pictures to come!!!

[Deacon]

Well another update, i got everything back from the machine shot, i am just waiting of FRSports.com to return me some money for the wrong bearings (my bad), i ordered the wrong size lol... but i had to have my crank ground and polished .25 over standard on the main journals, and .75 over standard on the rod journals, here are some pictures of whats up...
http://c4.ac-images.myspacecdn.com/images02/54/l_207ecb9dc2024032813f3b445f6a3fbf.jpg
http://c3.ac-images.myspacecdn.com/images02/25/l_eb30eb25a5264c278dc9c28281b1630e.jpg
http://c2.ac-images.myspacecdn.com/images02/44/l_b98070d07113485ead0b82db55dac7f1.jpg
http://c2.ac-images.myspacecdn.com/images02/8/l_77b1c61786e14626b1602d7aefbc6611.jpg
http://c1.ac-images.myspacecdn.com/images02/32/l_78e3adfd3634479fa506fa74d47fc730.jpg
http://c3.ac-images.myspacecdn.com/images02/10/l_4ab0af2ccabb4eaaaa1dda21aa14e792.jpg
http://c1.ac-images.myspacecdn.com/images02/47/l_53f834d476104890aa868c90e91203dc.jpg
Picked up a spair harness for the swap so i can have the harness all done, so i got no down time for the swap...

[Deacon]

http://c2.ac-images.myspacecdn.com/images02/27/l_fb54e806c8bc4d4185425b4b54c7b1f9.jpg
http://c1.ac-images.myspacecdn.com/images02/27/l_afbb62931a8549a4a2b5e0a178e9ee40.jpg
http://c3.ac-images.myspacecdn.com/images02/13/l_95177d5ac38d4d4eb90536043098626e.jpg
http://c1.ac-images.myspacecdn.com/images02/27/l_7537e8d95af14ada8f1e16a6d54209c8.jpg
http://c2.ac-images.myspacecdn.com/images02/61/l_e8fb092d42e84f78a49d74a206e97885.jpg
Well there is the update, i am waiting to go buy a piston ring compressor, along with some other tools and some oil(bleed the hydraulic lifters) and i can assemble the head, i also have to wait till hopefully tomorrow for my head gasket, if all goes as planned long block will be finished this week end... i will keep you posted... :)

[Deacon]

Been a while since i last updated :) well i ordered a new oil pan, oil filter, magnetic drain plug and a s13sr20det into a s14 chassis wiring harness...
Here are some pictues of what i have been up to :)
http://c1.ac-images.myspacecdn.com/images02/49/l_4433a62a45424a9ca7bf8b6a3ad518d8.jpg
http://c3.ac-images.myspacecdn.com/images02/46/l_53b25138c22141cfb7b6319afea8533e.jpg
http://c4.ac-images.myspacecdn.com/images02/19/l_dc825192b4234153b23ace20a8fcc00f.jpg
http://c4.ac-images.myspacecdn.com/images02/59/l_63077543d8bf4937b39fd226af57cd23.jpg
http://c2.ac-images.myspacecdn.com/images02/41/l_2eccbc502e23403da9e1e1c59907f221.jpg
Valve cover is going to be painted within the week im not gonna say what color but it should look sick :)

[Deacon]

Been a While since i updated, i ran into a issue gotta take the engine to a machine shot now :( but its all good i think i got it figured out good :)
Pictures explain all lol...
http://c1.ac-images.myspacecdn.com/images02/41/l_a81c18cde6b24c3092acdb38e69ddf28.jpg
http://c4.ac-images.myspacecdn.com/images02/52/l_51708aef18b141749f0a30ea9d1794ab.jpg
http://c3.ac-images.myspacecdn.com/images02/2/l_0d03a09e48d343c5b7e067246e77f0ae.jpg
http://c3.ac-images.myspacecdn.com/images02/25/l_16d88d2c0e834c50a5c93c046bb35862.jpg
Had an exhaust stud shear off when i was tightening it down, and well, i drilled it out and used an ez-out to get it out and that snapped off in it, so now its off to the machine shop to get the whole bolt drilled out and a thread lock "thread insert" put in, so hope this works if not its time to get a new head lol...

[Deacon]

Well to get my thread back on track and off the subject of heilcoils lol... here is the valve cover back from the powder coaters, i painted it wrinkle red but it didnt turn out how i would have liked so i sent it to the powder coaters for some Textured light red powder coating :) enjoy :D
http://c3.ac-images.myspacecdn.com/images02/16/l_9a435034af744ff0ba997e8300f9c5da.jpg
http://c1.ac-images.myspacecdn.com/images02/51/l_bcb85e25a10749f9a06c121cfe0e3550.jpg

[Deacon]

How you guys like, i will update as they come, i just had surgery 3 days ago so ints gonna be a week or 2 before i can finish up the sr project :(

[LV240S14]

not bad hope to see it running soon and drifting at the vegasdrift events

[Deacon]

It will be running and in the car and i WILL make at least one event down there, i just had my appendix taken out thursday so i have to be on bed rest a few days, and then i can get back to working on the motor and finishing some stuff up, all i need is a new clutch, intercooler, bov, and i am sending the harness out to durdan performance for rewire, shorten, and loomed, he does very good work from what i have seen... but i hope to have it up and running withing a month and ahalf, i have been taking way to long with this project...