LV240S14
11-22-2006, 10:47 PM
this is a engine pic i took last week. as you can see the shroud was damaged when a cab cut me off and i hit him. the wreck bent the hood and crushed the shroud. It still works so whatever....
http://i46.photobucket.com/albums/f105/Guildjs/000_0093.jpg
this is a pic of the inside of the car i gutted everything but it still has some tar left so i am trying to clean it up and paint it.
http://i46.photobucket.com/albums/f105/Guildjs/000_0100.jpg
This is a pic at the hard parker meetings on thursday nights...like i said i need to work on the body still...
http://i46.photobucket.com/albums/f105/Guildjs/000_0107.jpg
mod list:
suspension and rims
hks hyper d coilovers(nice but they don't go that low)
c tune front tension rod
c tune rear upper control arms
c tune rear traction arms
c tune rear toe arms
spl tire rod
spl tire rod ends
rear stock sway bar
greddy front strut tower bar
ebay rear strut tower bar
5 lug conversion
mb motoring weapons in bronze 17x9 +17 with 225/17/45 falkin azenis 615's on front and 235/17/40 115's in the rear
engine
s13 redtop sr20det
s15 turbo
850 cc injectors
z32 mafs
rom tune ecu
Spearco fmic with piping done by Garageworks
hks ssq bov
megan racing exhaust manifold
turboxs o2 housing
megan racing downpipe
cat back is basically pieces of my old exhaust and new parts welded in from wrecking
project silvia motor strut tower brace(great upgrade for the price)
spl solid tranny mount
koyo radiator with stock fan
silvia vlsd
body and etc
52mm greddy water temp gauge
greddy water temp upper radiator sensor adapter
52mm greddy oil pressure gauge
greddy oil pressure sensor adapter plate
60mm greddy warning boost gauge
bride zeta 3 with bride rail
sparco 4 point harness
momo steering wheel
momo steering wheel hub
quick release hub
i might of forgot some stuff but this is most of it.
I need to get a two way, some over fenders, wheel spacers(to get ride of the battleship look), and do some paint and body work. I will getting the cf hood off my other car when i get the new front end. I am also going to get the sun roof taken out to maybe cut down some weight
Now what i have done....alot of body work and some new coilovers i still have to put on
http://i46.photobucket.com/albums/f105/Guildjs/100_1804.jpg
http://i46.photobucket.com/albums/f105/Guildjs/100_1805.jpg
http://i46.photobucket.com/albums/f105/Guildjs/100_1806.jpg
http://i46.photobucket.com/albums/f105/Guildjs/100_1807.jpg
http://i46.photobucket.com/albums/f105/Guildjs/100_1808.jpg
http://i46.photobucket.com/albums/f105/Guildjs/100_1809.jpg
http://i46.photobucket.com/albums/f105/Guildjs/100_1810.jpg
http://i46.photobucket.com/albums/f105/Guildjs/000_0093.jpg
this is a pic of the inside of the car i gutted everything but it still has some tar left so i am trying to clean it up and paint it.
http://i46.photobucket.com/albums/f105/Guildjs/000_0100.jpg
This is a pic at the hard parker meetings on thursday nights...like i said i need to work on the body still...
http://i46.photobucket.com/albums/f105/Guildjs/000_0107.jpg
mod list:
suspension and rims
hks hyper d coilovers(nice but they don't go that low)
c tune front tension rod
c tune rear upper control arms
c tune rear traction arms
c tune rear toe arms
spl tire rod
spl tire rod ends
rear stock sway bar
greddy front strut tower bar
ebay rear strut tower bar
5 lug conversion
mb motoring weapons in bronze 17x9 +17 with 225/17/45 falkin azenis 615's on front and 235/17/40 115's in the rear
engine
s13 redtop sr20det
s15 turbo
850 cc injectors
z32 mafs
rom tune ecu
Spearco fmic with piping done by Garageworks
hks ssq bov
megan racing exhaust manifold
turboxs o2 housing
megan racing downpipe
cat back is basically pieces of my old exhaust and new parts welded in from wrecking
project silvia motor strut tower brace(great upgrade for the price)
spl solid tranny mount
koyo radiator with stock fan
silvia vlsd
body and etc
52mm greddy water temp gauge
greddy water temp upper radiator sensor adapter
52mm greddy oil pressure gauge
greddy oil pressure sensor adapter plate
60mm greddy warning boost gauge
bride zeta 3 with bride rail
sparco 4 point harness
momo steering wheel
momo steering wheel hub
quick release hub
i might of forgot some stuff but this is most of it.
I need to get a two way, some over fenders, wheel spacers(to get ride of the battleship look), and do some paint and body work. I will getting the cf hood off my other car when i get the new front end. I am also going to get the sun roof taken out to maybe cut down some weight
Now what i have done....alot of body work and some new coilovers i still have to put on
http://i46.photobucket.com/albums/f105/Guildjs/100_1804.jpg
http://i46.photobucket.com/albums/f105/Guildjs/100_1805.jpg
http://i46.photobucket.com/albums/f105/Guildjs/100_1806.jpg
http://i46.photobucket.com/albums/f105/Guildjs/100_1807.jpg
http://i46.photobucket.com/albums/f105/Guildjs/100_1808.jpg
http://i46.photobucket.com/albums/f105/Guildjs/100_1809.jpg
http://i46.photobucket.com/albums/f105/Guildjs/100_1810.jpg