standalone
07-29-2004, 05:57 AM
For sale: 1995 zenki sr20det (blacktop w/vtc)complete swap.
This was going to be my build up project, but bills came and i ran out of money. happy ending huh? well heres the list
Complete Sr20det motor, sr20det trans (no grinds)
nismo fork pivot, new pilot bearing, new throw out bearing, new rear main seal, cam angle sensor (cas), fully operable MAF meter, ECU, stock t28 b/b turbo, non-dented oil pan, semi new NGK spark plugs, all 4 (dis) ignition coil packs, coil pack cover, complete side mount intercooler (smic) with all piping and mounting brackets, and oem starter. Complete s14 sr wiring harness (uncut), lower transmission harness, one M’s K&N (jdm) air filter, hks super blow off valve (oldschool hks) w/flange on hotpipe, hks downpipe (brand new w/gaskets and bracket), stock downpipe (if wanted instead), brand new nismo tranny mount(1), and motor mounts (2), slave cylinder, motor came with a trust oil plate adapter, (mounts before oil filter, has extension spots for oil temp/oil pressure feeds), and SARD oil filter. Will include drive shaft for extra $$, ( have an extra 5spd d/s from the clip also). (does not come with clutch/flywheel, I thought it would be better for the new owners personal preference, besides that I had a exedy multi plate/flywheel for it but I sold it prior for the build up) also comes with a spare s13 sr20det long block, as I was going to build up the spare. And the block that comes on that motor doesn’t look in the most healthy shape (stock clutch blew up due to incorrect torqueing, and took out some parts of the block, not enough to make it nonusable, but chips here and there =X ). The motor did crank and run beautifully, no misfiring or signs of detonation. motor will run as is perfectly, but if you're a perfectionist, bottom end replacement is good. so it also comes with s13 longblock. I’m asking $4,300 for this complete swap package. Will part out if not enough serious buyers. Motorset – motor, trans, ecu, uncut harness, spare block, stock downpipe, smic, or any aftermarket part - $3200
shipping will be a grip i'm guessing because its a full motor, trans, spare block, and box of accessories.
thought i'd ask the locals first!! will take best offers from locals, so i dont have to ship all this!!
This was going to be my build up project, but bills came and i ran out of money. happy ending huh? well heres the list
Complete Sr20det motor, sr20det trans (no grinds)
nismo fork pivot, new pilot bearing, new throw out bearing, new rear main seal, cam angle sensor (cas), fully operable MAF meter, ECU, stock t28 b/b turbo, non-dented oil pan, semi new NGK spark plugs, all 4 (dis) ignition coil packs, coil pack cover, complete side mount intercooler (smic) with all piping and mounting brackets, and oem starter. Complete s14 sr wiring harness (uncut), lower transmission harness, one M’s K&N (jdm) air filter, hks super blow off valve (oldschool hks) w/flange on hotpipe, hks downpipe (brand new w/gaskets and bracket), stock downpipe (if wanted instead), brand new nismo tranny mount(1), and motor mounts (2), slave cylinder, motor came with a trust oil plate adapter, (mounts before oil filter, has extension spots for oil temp/oil pressure feeds), and SARD oil filter. Will include drive shaft for extra $$, ( have an extra 5spd d/s from the clip also). (does not come with clutch/flywheel, I thought it would be better for the new owners personal preference, besides that I had a exedy multi plate/flywheel for it but I sold it prior for the build up) also comes with a spare s13 sr20det long block, as I was going to build up the spare. And the block that comes on that motor doesn’t look in the most healthy shape (stock clutch blew up due to incorrect torqueing, and took out some parts of the block, not enough to make it nonusable, but chips here and there =X ). The motor did crank and run beautifully, no misfiring or signs of detonation. motor will run as is perfectly, but if you're a perfectionist, bottom end replacement is good. so it also comes with s13 longblock. I’m asking $4,300 for this complete swap package. Will part out if not enough serious buyers. Motorset – motor, trans, ecu, uncut harness, spare block, stock downpipe, smic, or any aftermarket part - $3200
shipping will be a grip i'm guessing because its a full motor, trans, spare block, and box of accessories.
thought i'd ask the locals first!! will take best offers from locals, so i dont have to ship all this!!